top of page



Water is one of the earth’s most valuable resources, with Century’s equipment, determining proper placement of screen zones, and completion of a well is very useful in today’s water market.  Multi-parameters tools with up to 10 different functions are very popular and equipment is priced to be economic for most small to mid-sized drilling or geophysical companies.  Borehole caliper logging, impeller or EM flow meter measurements, sonic velocity or cement bond logging, and borehole deviation are other important measurements. 

9074 Three Arm Caliper Logging Tool - Three arm caliper tool and gamma ray.  Additional options included casing collar locator, temperature, fluid resistivity measurements, and borehole deviation.  Useful in both open holes to measure hole size and volume and in cased holes to locate screens, perforations, and other casing features.

9512 Slim Hole Induction Tool - The slim hole induction measuring tool is used in PVC cased hole, and air filled holes where traditional electric logs cannot be obtained.  The tool can also be used in highly conductive formations such as iron, nickel and rare earths to further classify these formations. 

9722 E-M Flowmeter - The EM flowmeter is used in mining, geotechnical, and environmental applications.  The flowmeter has no moving parts, using a sensor developed by the TVA, flow is measured using Faraday’s Law of Induction.  Can be run both in trolling or in stationary modes. 

9751 Fluid Sampler Tool - The fluid sampling tool takes depth specific samples for water quality.  Tool is stationed at the measured depth, the logging technician opens the sample valve, using the caliper reverse switch, and sample flows into the sample chamber.

9804 Series Acoustic Televiewer Tool - Another borehole imaging tool, the acoustic televiewer tool uses sounds waves to image the borehole wall.  Primarily used for structural analysis of formations and orientation of fractures.  Used in mining, geotechnical, and environmental applications. 

bottom of page