ACCESSORIES
We provide all the accessories and parts you need to get the job done.
Cableheading
Complete Cablehead Assy. & Instructions - 112000
Spring - 110281
Cone (3/16" diameter) - 110511
Cone (1/4" diameter) - 110512
Cup - 110521
Fishing Bell - 110551
Brass Washer - 110581
Spacer Adapter - 110531
Locking Nut - 112002
Cap - 110571
4-Pin Connector - 760-0111
Rubber Boot - 779-0039
O-Ring (2 required) - 765-2115
Keyed Connector - 112003
Zerk Fitting - 764-0003
Stainless Set Screw - 779-0110
Cableheading Tools
Tools Included: Multi-Meter, Vice Grips, Side Cutter, Needle Nose, Soldering Iron, Hammer, Chisel, Wire Strippers, Grease Gun, Electrical Tape, Spare O-Rings, Heat Shrink
Deviation Test Stand
Used to calibrate tools, which have a deviation device, that measures slant angle and bearing. Constructed of welded aluminum the stand is non-magnetic for proper testing of a deviation device (magnetic or gyro can be used). 3 adjustable leveling legs are included, and a rotational motor is used to spin the tool during the test. A compass is mounted on the back support bracket to determine direction of the stand, prior to placing the tool into the device.
Centralizers
Multiple configurations based on tool design and applications.
Resistivity Calibration Box
Calibrates the resistivity of the tool.
Thermal Printer
High Speed Graphic Printer, for Field and Final Log Plots. Able to print on clear media for blue line prints. An innovative paper handling system that permits reloading of paper without any threading or alignment is standard.