DIPMETER LOGGING TOOL - 9412
The Dipmeter tool is a formation strike and dip directional probe primarily used in mining and environmental logging applications. Additionally, the tool also records natural gamma, X-Y calipers, and borehole deviation is computed from the slant angle and bearing measurements calculated from the inclinometer and magnetometer sensors. To ensure accurate strike and dip measurements in small-diameter holes, special care should be taken when calibrating the calipers to maximize their accuracy. Caliper arms open fully within one minute.
Benefits:
Fully downhole digital
Quick automatic setup, unique tool identification
Designed for one-man operation
Can be customized to your specific needs
Features:
Properties Measured:
-
Slant Angle Bearing: Offset: 67 cm (26.4 in.)
-
Natural Gamma: 2.2 x 8.9 cm (0.875 x 3.5 in.)
NaI (TI) Scintillation Offset: 149 cm (58.92 in.) -
Slant Angle Bearing: Offset: 67 cm (26.4 in.)
-
Independent X-Y Calipers: Maximum 30 cm (12 in.)
Hole Diameter Offset: 305 cm (120 in.) -
4-pad Micro Resistance: (Current) Offset: 305 cm (120 in.)
Specifications:
Length: 324.7 cm (127.82 in.)
Temperature: 85C (185F)
Diameter: 69 mm (2.75 in.)
Pressure: 176 kg/cm2 (2500 PSI)
Weight: 29.9 kg (66 lb.)
Logging Speed: Maximum: 5.5 m/min. (18 ft./min.)
Minimum: 2.7 m/min. (9 ft./min.)
Tool Voltage Required: 85 VDC (at Top Sub)
Tool #:9412
Part #:323100
9412 Product Description