1223 S. 71st East Ave. Tulsa, OK 74112  USA (918)838-9811 office (918)838-1532 Facsimile
Turning Data into Information since 1946
This three-coil slim hole induction tool was designed to provide conductivity and converted resistivity logs in open boreholes or PVC/plastic cased holes with casing sizes 5.08 cm (2 in.) or greater. The probe measures the rock conductivity in borings and wells within a zone of 25.4 to 127 cm (10 to 50 in.) from the well, but is not sensitive to the borehole fluid, casing, or grouting materials. The tool can also be used in air filled holes to measure the conductivity response. In addition, the tool also simultaneously records natural gamma ray in API units or CPS for determination of clay content and radioactivity measurements.
Slim Induction Tool
FEATURES Properties Measured 1.   Natural Gamma: 2.2 x 10.2 cm (0.875 x 4.0 in.) NaI Scintillation Offset: 17.5 cm (6.9 in.) 2.   Induction: Coil-focused conductivity 3-Coil Conductivity Electrodes Offset: 152.2 cm (59.9 in.) Main Coil Spacing: 50.0cm (20 in.)  Length: 266.7 cm (105.0 in.) Temperature: 70 C (158 F) Diameter: 41 mm (1.625 in.) Pressure: 281 kg/cm2 (4000 PSI) Weight: 7.46 kg (20 lb.) Logging Speed: 9 m/min. (30 ft./min.) Tool Voltage Required: 30 VDC TOOL#: 9512   
Home Products Services Rentals Support Careers Contact Us Userís Guide © All Rights Reserved- Century Geophysical, LLC 2015